|
|
|
|
|
|
Axle Boot KIt
|
|
List Price: $30.00
Our Price: $25.00
Sale Price: $22.00
Save $8.00!
|
|
|
These kit will exceed the life of any stock boot two fold. Each kit include: 2 bands, 1 boot, and 1 grease pack. More bands or grease can be purchased separately.
|
|
|
|
|
|
|
|
|
|
Yamaha Rhino rear diff brace
|
|
List Price: $85.00
Our Price: $55.00
Sale Price: $40.00
Save $45.00!
|
|
|
This is a rear differential brace for the Yamaha Rhino. (All years and models) If you are running or plan on running a lift or big tires you need this. It will keep you on the trail and off the trailer. It’s a must have for the any type of rider.
|
|
|
|
|
|
|
|
|
|
Yamaha Rhino front stick stoppers
|
|
List Price: $85.00
Our Price: $65.00
Sale Price: $50.00
Save $35.00!
|
|
|
If you are and extreme mudder or the average everyday rider you will need the added protection of steel stick stoppers. These stick stoppers will go where you go and keep on going. One added benefit of these stick stoppers is if you are running black mamabas on your rhino the stock stick stoppers will not work. The SLC stick stoppers will! (these will fit all years and models)
|
|
|
|
|
|
|
|
|
|
Gorilla axle rebuild kit.
|
|
Our Price: $135.00
Sale Price: $130.00
Save $5.00!
|
|
|
Gorilla's Heavy Duty Rebuild Kits are designed to be OEM replacement parts that increase the durability of the stock axle.
Gorilla's Heavy Duty Rebuild Kits consist of specially redesigned internal cv parts. We start with a 35% increase in cage thickness along with a reduction in diameter of the star race. 4340 Chromoly Steel is used to provide a combination that more than doubles the strength of the joint compared to the OEM parts.
Each kits comes with a cage, race, and six ball bearing. Disassembly and assembly instructions are included...(and it's REALLY easy!)
|
|
|
|
|
|
|
|
|
|
STI stock replacement Axles
|
|
Our Price: $148.95
Sale Price: $139.95
Save $9.00!
|
|
|
If you are looking for a competitively priced replacement axle for your machine, look no further than the STI axles by Interparts.
All STI axles feature:
A complete axle that is fully assembled including inboard and outboard joints.
4340 chrome-moly steel axle shaft.
Internal parts are precision ground and assembled using high temperature, high load bearing moly grease to ensure maximium internal lubrication.
Crack resistant neoprene boots.
Engineered to provide superior performance.
|
|
|
|
|
|
|
|
|
|
rhino brand axle
|
|
Our Price: $200.00
|
|
|
To ensure the highest quality and performance, Rhino Brand Axles are made from Heavy-Duty 4340 Chromoly Steel, one of the industry’s strongest materials. This creates an excellent strength-to-weight ratio for these heavy-duty axles. Along with being significantly stronger than other axles, Rhino Brand Axles can operate at huge angles. Generally after a lift kit or larger tires are added OEM axles are not up to the task of handling the added pressure. This often leads to the weakening and eventual breakage of the axles. Rhino Brand Axles are engineered to have larger shafts and CVs making them able to handle these extreme angles. Not only can they handle the angle pressure, Rhino Brand Axles perform exceptionally well under the stress of high-powered motors and aggressive tires. These axles have proven themselves again and again and can withstand the test of the most intense riding.
We offer a 1 year warranty on all RHINO Brand axles.
|
|
|
|
|
|
|
|
|
|
Turner Cycles HD Axles (stock length)
|
|
List Price: $375.00
Our Price: $360.00
Sale Price: $360.00
Save $15.00!
|
|
|
"TURNER HD AXLE" has been perfected over the years to hold up to an incredible amount of abuse. Designed for everyday riders and weekend warriors, this axle can accommodate mild lifts with large tires. We have improved this axle throughout the years to the maximum quality so that the riders can enjoy playing in the mud and exploring the trails.
|
|
|
|
|
|
|
|
|
|
Gorilla Axles
|
|
List Price: $385.00
Our Price: $380.00
Save $5.00!
|
|
|
It's common knowledge that OEM parts were made to be JUST strong enough to get the job done. That's exactly why Gorilla Axle created a SUPER-STRONG Gorilla Duty CV Axle to pick up where teh ATV manufacturers left off.
Along with being much stronger than their OEM counterparts, Gorilla Duty Axles can take up to 40 degree angles which makes them PERFECT for riders looking to install extended suspension lifts or oversize tires! Usually, after a lift in installed, stock axles are at their weakest point and cannot withstand the constant strain of the added stress of the angles. In time, this causes increased weakness...and eventually...breakage, stranded riders, and embarrassment!
To handle the extreme angle caused by suspension lifts, the Gorilla Duty Axles have a uniquely designed, patented upper cv joint allowing them to articulate especially well compared to stock parts. However, being able to operate at high angles is only HALF of the special features offered by Gorilla Duty Axles.
In order to withstand the extreme stress of high horsepower motors and SUPER-AGGRESSIVE oversized tires, Gorilla Duty Axles are made of 4340 Chromoly Steel, one of the industry's strongest steels, which is then machined to a precise fit for your quad! They are then heat-treated and cryogenically treated to ensure their absolute strength and durability.
Covering the CV Joints are heavy duty Neoprene Boots filled with Lucas Oil Xtra Heavy Duty Grease to make sure the axles keep running as smoothly as when they were assembled even in the harshest riding conditions.
Gorilla Duty Axles are assembled by hand in the Gorilla Axle Headquarters, located in Monroe, LA to fit the particular make and model needed by our customers.
Gorilla Duty Axles come complete with a one-year limited warranty against breakage.
|
|
|
|
|
|
|
|
|
|
Turner Cycles NITRO ATV axles (stock length)
|
|
List Price: $525.00
Our Price: $500.00
Sale Price: $495.00
Save $30.00!
|
|
|
Experience our new "TURNER NITRO AXLE", designed in 2009. Turner Cycles has realized over the last few years that since ATVs AND UTVs are heavier and more powerful, an axle had to be designed to withstand the pressures of the market. With every component reconfigured, this new axle was designed specifically for big lifts, large tires, upgraded motors and more. While this axle can be used for extreme duty applications, it can still conveniently be used in stock ATV and UTV applications.
|
|
|
|
