|
|
|
|
|
|
|
|
|
|
|
|
|
|
Today’s motorcycles require a high performance oil filter, with a high oil flow capacity, in order to withstand high heat and pressures. EMGO oil filters meet or exceed these requirements
|
Black with white SLC logo on side.
Black with lime green SLC logo on side.
Blue with lime green SLC logo on side.
Red with white SLC logo on side
Specify color. Will ship specified color if available.
|
All Balls Racing ball joints are sold per A-arm and come with a snap ring and cotter pins. Their quality design and construction meet the toughest standards and conditions, from daily commuting to full-on racing. Each of these All Balls Racing ball joints features a heavy-duty steel case with POM-M90 bearing material for long life. These All Balls Racing ball joints are offered in a wide variety of applications, including those Kawasaki and Suzuki applications that force you to buy an expensive A-arm or steering knuckle. Put an end to premature ball joint failure by upgrading from your OE aluminum joint to these heavy-duty steel joints.
|
|
|
|
|
|
|
|
|
|
|
Axle Boot KIt
List Price: $30.00
Our Price: $25.00
Sale Price: $22.00
Save $8.00!
|
|
|
|
|
|
Are you having problems with the brittle stock Renegade headlight bracket? Well if so SLC has the fix for your problem! We have seen many broken brackets and have been asked many times if we had a fix for this issue. So we went to the drawing board and came up with a sure fire fix.
|
The Uni Air Filter is two layers of foam that will trap small and large particles like dust and dirt helping prevent anything reaching to the cylinder. Uni Air Filter is manufactured of high performance foam and biodegradable. The Uni Air Filter has a seamless design that allows for a maximum amount of air flow to your machine. The Uni Air Filter is easy to clean with the Uni Air Filter Cleaning Kit and will help cut the grease and oils down so you are able to reuse indefinitely
•MULTI-STAGE COMPETITION OFF-ROAD AIR FILTERS.
•Traps dirt and dust in two layers of foam, the large pore pre-filter captures the bigger particles.
•The small pore inner filter prevents any engine wrecking grit from reaching the cylinder.
|
These kit will exceed the life of any stock boot two fold. Each kit include: 2 bands, 1 boot, and 1 grease pack. More bands or grease can be purchased separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These tie rod ends are a direct replacement of your stockers but with a heavy duty upgrade. Each kit contains enough ends to rebuild one tie rod.
|
This is a rear differential brace for the Yamaha Rhino. (All years and models) If you are running or plan on running a lift or big tires you need this. It will keep you on the trail and off the trailer. It’s a must have for the any type of rider.
|
If you are and extreme mudder or the average everyday rider you will need the added protection of steel stick stoppers. These stick stoppers will go where you go and keep on going. One added benefit of these stick stoppers is if you are running black mamabas on your rhino the stock stick stoppers will not work. The SLC stick stoppers will! (these will fit all years and models)
|
|
|
|
|
|
|
|
|
|
FMF Power Kits
List Price: $59.95
Our Price: $59.95
Sale Price: $55.95
Save $4.00!
|
|
|
|
|
|
While you are Blinging out your bike don’t forget the front grill! SLC has awesome diamond plate grill for the 2010 and newer Polaris RzR, RzR-S, RzR 4 and RzR 900xp. These grills will give you awesome look and better coverage from the elements. The kit will include all the mounting hardware needed. So Support SLC and bling out your ride at the same time!
Finishs:
miror diamond plate
black diamond plate
mill finish aluminum
|
Power up jet kits make jetting your carb simple!
FMF teamed up with DynoJet to produce a kit that offers a slection of jets and/or needles to get maximum Horsepower out of ATVs fitted with a FMF Exhaust.
Easy to use instructions have diagram and step/step procedures to help you get your jetting whee it needs to be, no matter your elevation.
No more driving back and forth to the dealer with a handful of jets and needles with a million questions running around in your head on where to start.
|
* Bold new styling!
*New low-profiling center caps
* Features HD Alloy construction, including reinforced inner bead lip
*12x7 and 14x7 sizing
*1000-lb load rating for both sizes
*Lifetime structural warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Honda 420 is a great mid size bike for any age. With this lift kit you can take your 420 to the next level and step up to the massive tire you have always wanted.
coming soon: 420 rancher 2" lift with a 2" rake (swing are extension)
|
The M12 Diesel by Motosport Alloys is a first for a couple reasons. This is the first wheel in our line up to carry the MSA bolt on cap and the first 15” wheel offered by MSA. This wheel boasts an Army Green version which must be seen in person to appreciate how Motosport Alloys pushes the design envelope. If you want a customized look you can add the yellow cap to the black finish or put the silver the cap on the green finish. Caution as this wheel will create “double-takes” on the trail by others admiring this incredible design.
Black available in 15”
Bolt on MSA Cap
14” available in Green, which looks great on Camo Colored quads
Lightweight virgin aluminum alloy used in Low Pressure Casting for high luster & low porosity
Lifetime structural warranty
**********LUGS ARE NOT INCLUDED
|
You will love the New M15 Crusher ATV Wheels from MSA. This wheels fits many makes and models and this wheel boasts being the second 15” wheel available in our line-up. Strong durable low-pressure casting made with high quality aluminum alloy. This wheel comes with a black bolt on star cap to match, making the styling seamless. Give us a call today to get rolling with this high quality part.
Available in 14” and 15” sizes
Mounts with the EFX Motogrip 15” Radial Tire
Choose different color caps Yellow/Silver/Chrome (Black Standard)
Chrome Rivet Accents
****LUG NUTS ARE NOT INCLUDED.****
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sedona wheels are manufactured from aluminum with polished accents. Ultra strong and light weight structure. Center caps are included. Available in 12" and 14"
***DOES NOT INCLUDE LUG NUTS****
|
•Upgrade ATVs from the failure-prone 10mm tie rod assemblies to the All Balls heavy-duty 12mm tie rod assemblies.
•Each kit contains 2 tie rods, 4 tie rod ends along with the cotter pins and jam nuts.
|
* Bold new styling!
*New low-profiling center caps
* Features HD Alloy construction, including reinforced inner bead lip
*12x7 and 14x7 sizing
*1000-lb load rating for both sizes
*Lifetime structural warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-Bold new styling!
-New low-profile center caps
-Features HD Alloy construction, including reinforced inner bead lip
-12x7 and 14x7 sizing
-1000-lb load rating for both sizes
-LIfetime structural warranty
- Cadium Plated Beadlock Bolts available (Call to order)
-Replacement Rings also available (Call to order)
|
-Bold new styling!
-New low-profile center caps
-Features HD Alloy construction, including reinforced inner bead lip
-12x7 and 14x7 sizing
-1000-lb load rating for both sizes
-LIfetime structural warranty
- Cadium Plated Beadlock Bolts available (Call to order)
-Replacement Rings also available (Call to order)
|
-Bold new styling!
-New low-profile center caps
-Features HD Alloy construction, including reinforced inner bead lip
-12x7 and 14x7 sizing
-1000-lb load rating for both sizes
-LIfetime structural warranty
- Cadium Plated Beadlock Bolts available (Call to order)
-Replacement Rings also available (Call to order)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-Bold new styling!
-New low-profile center caps
-Features HD Alloy construction, including reinforced inner bead lip
-12x7 and 14x7 sizing
-1000-lb load rating for both sizes
-LIfetime structural warranty
- Cadium Plated Beadlock Bolts available (Call to order)
-Replacement Rings also available (Call to order)
|
If you are looking for a competitively priced replacement axle for your machine, look no further than the STI axles by Interparts.
All STI axles feature:
A complete axle that is fully assembled including inboard and outboard joints.
4340 chrome-moly steel axle shaft.
Internal parts are precision ground and assembled using high temperature, high load bearing moly grease to ensure maximium internal lubrication.
Crack resistant neoprene boots.
Engineered to provide superior performance.
|
The Yamaha Rhino set the stage for the wildest craze in the off road industry.(RUV market) With their introduction SLC introduced and lift kit that would match the durability of the rhino and meet the expectations of every customer out there. These kits were designed to be easy to install, durable, look awesome, and give you the added ground clearance needed to clear the off road obstacles that use-to would hang you up. These kits are made in the USA and are built from CNC cut 3/16 plate to achieve a prefect fit every time! (this kit will fit all years and models of rhinos except Sport)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Polaris Sportsman is one of the most dependable ATVs in the market. If you combine the Sportsman and the SLC 3" lift kit you have an unmatched combination! The SLC sportsman 3" lift kit will include all the lift components and hardware needed to get your bike off the ground and down the trail! SLC also backs this lift with a lifetime warranty so you really can't go wrong with SLC's Sportsman 3" lift kit.
|
SLC just released its all new Polaris Ranger Midsize 2.5" lift kit. With CNC cut and welded brackets and percision cut spring spacers you will get the durability and hiegth you are wanting! with this kit you will be able to run 28" tires and with the optional forward a-arms you can run up to 31" tires. These kits have been tested and tested and now they are avaliable to you. So if you are tired of your midsize being plan and normal, heres your answer! backed by SLC's NO questions asked life time warranty.
This kit will fit all midsize models including the 2013 800
|
This Polaris Ranger lift kit will get your bike up where you need to be with out breaking the bank. The kit will lift your Ranger a full 2.5" with out sacrificing your stock axles or suspension. So get you Polaris up where it needs to be with the SLC 2.5" lift kit.
Kit Fits 2009-2013 Ranger, Ranger Crew.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SLC has noticed many many side x sides coming in with burnt fuel pumps over the past few months and decided to has a pump built to fit all the Polaris Side x sides. This pump is a fraction of a stock system witch only comes as a whole fuel tank assembly. These pumps will also give you a better fuel pressure and more volume for lager more aggressive motor builds. So if you are looking for a fuel pump to replace you stock Polaris pump then look no further SLC has them ready to ship. We will also have the sportsman 500-800 EFI pumps in stock very soon.
|
These are stock replacement arched a-arms for the GEN I Can Am Outlanders. These a-arms will give you the added ground clearance where you need it most! We built these a-arms to withstand anything you through at them, built from 1"x.120 wall DOM tubing and backed by a Life Time Warranty.
**Requires a 2 or 2.5" lift kit**
Kits will fit:
Gen I 400,500,650, and 800 Outlanders.
|
When Polaris released the 2013 Ranger 900 XP, SLC knew we had over the top easy to install, massive amounts of ground clearance, and the ability to do all this while still retaining the stock axles. With this kit you can run 29" tires with no rubbing issues. If you equip the Ranger with the optional 2" forward a-arms you can run up to a 32" tire with out rubbing issues. So if you are looking to dependable and rugged lift for your Ranger 900 XP, then look no further!
Pics shown with optional 2" forward a-arms.
|
|
|
